The surface sink is easy to install and does not require cutting the cabinet plate. Also, by purchasing this model, we will not need to constantly dry the cabinet screen around the sink. Built-in models have a higher variety in terms of material and model. Types of built-in sinks include glass, steel and granite. The built-in sink also takes up less space than the built-in models.

One of the questions that store buyers always ask us is how deep is the pelvic sink? Are deep sinks a better option? In response, it should be said that the depth of the pelvic sink is usually 15 to 30 cm. Regarding the second question, when buying a sink, choose the depth of the pelvis according to the height of the housewife, because it will be difficult for ladies with short or medium height to wash dishes in very deep sinks.

You may be wondering what a sink under a Corinne is and what kitchens it fits into. The sink under the Corin is called the models whose pelvis will be installed separately inside the screen. In other words, these models of sinks have no tray and are composed only of the pelvis. The number of pelvis also depends on the space in the kitchen.

The sink under the Corinne creates a modern atmosphere in the kitchen. Because there is no clear view of this sink. We have no space limit for installing this sink. As an example, they can be installed in the corner or kitchen counter.

An important point that is emphasized in the purchase of valves is to pay attention to the quality and material of the product. In some valves, which are made of substandard raw materials, after a while, we see yellowing and staining of their surface. So give priority to select models from reputable manufacturers with a multi-year warranty.

Simply put, there are three main parts to valves: The first part is the pipe that connects the valves to the main water source so that water can enter the valve. The second part is a valve for the passage of water and the location of the water flow blocker that controls the disconnection and connection of the water flow. The third part is the short pipe inside the valves that determines the passage of water inside the valve to the water outlet.

In lever valves, hot and cold water flows to the center of the valve and passes through a piece called the cartridge. The cartridge handle is controlled by the consumer through the lever valve handle. By moving the lever valve handle, the cartridge ceramics slide horizontally over each other to close and open the hot and cold water inlet ducts and control the hot and cold water flow ratio. Then a single flow of water at the set temperature is directed through the pipe inside the valve to the water outlet (lever valve drain).

Positive tips of lever valves: Installation, maintenance and use of single-lever lever valves is easier and takes up less space.

Disadvantages of lever valves: It may be a little difficult for some people to work with a handle to adjust the water temperature.

Unlike lever valves, classic faucets for hot and cold water have separate adjustment handles on either side of the valves, which are usually screw-type. Also, the performance of the blocker that shuts off the water flow is different. Twisting handles are attached to a screw blocker. By twisting this handle by the users, the blocker is moved and depending on the direction of twisting or more water is passed through the valve or the water path is narrower and finally closed. This mechanism controls the amount of effluent.

Pros of Classic Sanitary Valves: It may be easier for some to adjust the water temperature or work with classic valves.

Disadvantages of classic sanitary valves: These valves are more difficult to install than lever valves, and it is easier to use both hands to adjust the water.

Leverage valves are more practical. Although classic valves (with two handles) have symmetry that may be considered in many bathrooms and toilets, especially in traditional decorations, lever valves are practically more suitable in all respects. It is also easier to adjust the water temperature and clean it, and sealing the best lever valves will last a long time.

1- Leverage valves with mixing cold and hot water and using a handle to adjust the pressure and water temperature of this type of valve takes less space. It is also possible to adjust the lever valves at the desired temperature and open the faucet next time with the same settings. It is better to have two modes in the output of the Pralator dishwasher science, so that while using the water output mode more to fill the kettle and sprinkler, the second mode with less water output should be used when rinsing the dishes to save water consumption.

2- Shawl dishwashers and kitchen faucets that have a button on their science to change the mode from normal to spray mode may also be of interest to some people. These valves are also usually lever valves. Of course, using a perlator or deciduous milk reducer also helps to spray water permanently and save water consumption.

3- The best lever valves that have a ceramic cartridge are usually more durable and have better sealing.

1- When buying lever valves, consider the space available for installing valves. If you are looking to buy lever valves, be sure to consider the distance between the valve and the wall of the window behind it. This is because the lever handle of the valve may collide with the surrounding obstacles as it rotates.

2 - When buying lever valves, pay attention to the location of your old valves. If your old toilet and faucet faucets are installed on the wall, when buying a faucet faucet or buying a new faucet, either choose it as a wall so that it can be installed in place of the previous lever faucets or make sure that your sink It has at least one hole for installing the lever valve and two holes for the installation of classic two-valve valves.

3 - When buying lever valves, consider the number of sink holes. If you want to change the decoration from classic valves to levers, be sure to consider the number of sink holes. Most old sinks have three holes, two for the taps and one for the alarms. Some valves have a sheet to cover the extra holes, but some levers do not have such a wide plate. In this case, if you do not want to change your sink, after installing the desired lever valves, you can cover one of the holes with soap.

4- Leverage valves are available in a variety of plating. Because classic valves are less and less involved in the process of producing valves, in addition to the variety of models, lever valves also have more color variation. Today, chrome, rose gold, black lever valves, white valves, gold and olive valves, etc. are available in the market, and consumers can buy the appropriate valves according to the points that are important for choosing the color of the valves.

Make sure the valve handle is tight.

Check the leg o-ring.

Garbage is probably stuck in the machine.

The problem can be a broken cartridge, a bad washer with a bad seat.

The air conditioner may have improper sealing, may not be well tightened, or may be grooved on both sides.

Bad o-rings are the most likely option.